Results 1 to 10 of 10
  1. #1
    Member
    Join Date
    09.21.13
    Location
    Sudbury, MA
    Posts
    43
    Liked: 7

    Default Thinking about PFM (long term FM driver)

    Hi All.
    I'm trying to learn more about the PFM to see if it would be a good fit.
    I have two standard FMs which I love. I am able to do almost all of the maintenance myself including gearbox rebuilds.
    Of note I've also had 5 Rx-7s and I have a 74 Mazda Rotary Pickup. You see the theme here.

    Trackside can a PFM be started. fueled etc by one person or do you need a helper. There was a PFM at my home club which always seemed to have 4 people working on it!

    Is the starting procedure complex with the external battery and dual speed starters? I saw a video about using an external fan to keep the coolant temperature down until it matches oil T. Is this correct?

    Parts are incredibly available from Moses for the FM. Is the same true for PFM?

    Can a decent amateur mechanic do fluids, brakes, and gearbox maintenance (I do all this on my FMs)?

    Finally, reliability. The FM is fairly bulletproof. How does a PFM compare.

    THANKS and sorry for all the noob Qs.
    '95 FM Red the "Formula Meowzda"

  2. #2
    Senior Member
    Join Date
    09.29.20
    Location
    Santa Clarita, California
    Posts
    207
    Liked: 31

    Default

    I have a 2009 PFM that I bought for my first race car. I have several years of go karts and off-road racing behind me, but this is my first formula car. I only use it for track days and to have fun. I don’t have the budget to throw thousands and thousands of dollars at it with all my other expensive toys and hobbies. So far, it hasn’t cost me anything except running expenses, fuel, entry fees, etc.

    It took me a few weeks of going through the car when I bought it, because I’m OCD. It’s very easy to work on and parts are readily available from a company in Arizona. I do all the service and maintenance myself in my home garage, with help from this Forum.

    Trackside you will need a helper. My wife or a buddy comes to the track with me to help me get belted in and remove the jumper battery plug after starting the car. My wife or buddy use a leaf blower to keep the water temp down while the oil heats up. We use hand signals when I want them to step away so I can go on the track. Again, all very easy.

    For the jumper battery I use a NOCO that I changed the clips to a car matching plug. It’s lightweight, small and has a ton of power for starting. I don’t know why anyone would use a car battery when there are NOCO’s available.

    My car has been bulletproof, but im not going to be rebuilding the gearbox when it needs it. I don’t have that kind of skill.

  3. #3
    Member
    Join Date
    09.21.13
    Location
    Sudbury, MA
    Posts
    43
    Liked: 7

    Default

    Thank you for the reply.
    Food for thought.
    '95 FM Red the "Formula Meowzda"

  4. #4
    Member
    Join Date
    12.11.21
    Location
    Anderson, South Carolina
    Posts
    41
    Liked: 10

    Default

    I, too, have both an FM and a PFM. When the FM's engine finally gave up after several race seasons, I bought the PFM (seemed like a good excuse to buy a new car!). Overall, I'll say that the car seems more 'refined' (smoother, no rattles, etc.) than the FM. Subsequently, we overhauled the FM engine and, since I don't need a sealed engine, built it with higher compression and lighter rotors. I suspect it has another 10 to 20 horsepower and we raised the redline to 8,000RPM. One of my adult sons has been driving it (the FM) and it's not that much slower than the PFM.

    As for what you asked, the maintenance and repairs are similar to an FM and, yes, you can operate it without a full ground crew. Some things are just a little more challenging than the FM (like installing the cockpit head surround after you've gotten into the car). In some respects, it's easier (e.g., no more tinkering with carburetor adjustments). I also think that parts are a little more expensive since this is a higher level car. You specifically mention cooling while warming it up and mine has an electric fan which makes life easy. As you know, sitting on the grid with the FM running, you have to watch the coolant temperature. With the PFM, when the coolant temperature hits 190 degrees (it's fully programmable) and the car is stationary, the fan kicks on and I can watch the temperature start to tick back down.

  5. #5
    Member
    Join Date
    09.21.13
    Location
    Sudbury, MA
    Posts
    43
    Liked: 7

    Default

    Thank you for the info! The bulk of the time I am running my car by myself. The FM is easy enough to warm up, strap in, and get going solo. I do have some concerns about being this 'independent' with the PFM.
    '95 FM Red the "Formula Meowzda"

  6. #6
    Member
    Join Date
    12.11.21
    Location
    Anderson, South Carolina
    Posts
    41
    Liked: 10

    Default

    Also, except for the first start of the day, my car does just fine using only the onboard battery. I installed a lightweight battery a couple years ago and even though it only weighs 4 or 5 pounds, it starts the car without any problem.

  7. The following members LIKED this post:


  8. #7
    Contributing Member mikey's Avatar
    Join Date
    11.26.10
    Location
    Nashville, Tennessee area
    Posts
    1,751
    Liked: 540

    Default

    I had PFM. Could do all maintenance by myself. Operated at the track by myself. Where there is a will there is a way.

  9. The following members LIKED this post:


  10. #8
    Senior Member
    Join Date
    09.29.20
    Location
    Santa Clarita, California
    Posts
    207
    Liked: 31

    Default

    There’s always someone at the track willing to help get you belted in and unplug the jumper battery.

    I was looking at a 14V onboard lithium battery but it was $600 so I just got the NOCO.

  11. The following members LIKED this post:


  12. #9
    Member
    Join Date
    12.16.10
    Location
    Percival
    Posts
    86
    Liked: 17

    Default

    I’ve seen that teams split the car apart after every weekend and seem to be going through the gearbox, pulling the engine, clutch, etc. Not sure if everyone does that, and the necessity of that level of maintenance, but just an observation. And this for even non Pro
    level drivers.

  13. The following members LIKED this post:


  14. #10
    Senior Member HazelNut's Avatar
    Join Date
    08.07.02
    Location
    locust valley, ny USA
    Posts
    1,966
    Liked: 148

    Default

    Quote Originally Posted by racpercival View Post
    I’ve seen that teams split the car apart after every weekend and seem to be going through the gearbox, pulling the engine, clutch, etc. Not sure if everyone does that, and the necessity of that level of maintenance, but just an observation. And this for even non Pro
    level drivers.
    that's totally unnecessary even at the pro level
    Awww, come on guys, it's so simple. Maybe you need a refresher course. Hey! It's all ball bearings nowadays.

  15. The following 2 users liked this post:


Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




About Us
Since 2000, ApexSpeed.com has been the go-to place for amateur road racing enthusiasts, bringing together a friendly community of racers, fans, and industry professionals. We're all about creating a space where people can connect, share knowledge, and exchange parts and vehicles, with a focus on specific race cars, classes, series, and events. Our community includes all major purpose-built road racing classes, like the Sports Car Club of America (SCCA) and various pro series across North America and beyond. At ApexSpeed, we're passionate about amateur motorsports and are dedicated to helping our community have fun and grow while creating lasting memories on and off the track.
Social