Results 1 to 13 of 13

Thread: downforce

  1. #1
    Member
    Join Date
    02.08.23
    Location
    Highlands Ranch, Colorado
    Posts
    5
    Liked: 1

    Default downforce

    I'm in the process of building my own shock package for a first gen FM, I have all the numbers the shock guru needs except maximum downforce on the front and rear wings. Does anyone have these numbers or know where I could find them or who would.

    Thanks
    Jay Jacobellis
    303.683.0333

  2. #2
    Senior Member David Ferguson's Avatar
    Join Date
    09.06.02
    Location
    Paso Robles, CA
    Posts
    1,179
    Liked: 307

    Default

    You don't say what vehicle speed (actually air speed), but at 100 mph, I would expect a total of 500 - 800 lbs (distribution should be equal to the weight distribution).
    David Ferguson
    Veracity Racing Data
    Shift RPM App for iOS
    805-238-1699

  3. #3
    Member
    Join Date
    02.08.23
    Location
    Highlands Ranch, Colorado
    Posts
    5
    Liked: 1

    Default

    Quote Originally Posted by David Ferguson View Post
    You don't say what vehicle speed (actually air speed), but at 100 mph, I would expect a total of 500 - 800 lbs (distribution should be equal to the weight distribution).
    David
    Thanks for the reply, I would assume max speed would be 125mph, you state 500- 800 does that mean 500 on the front wing and 800 on the rear I'm not an engineer so please excuse my ignorance
    Jay

  4. #4
    Senior Member
    Join Date
    03.22.02
    Location
    Pittsboro IN
    Posts
    1,104
    Liked: 301

    Default

    I would assume 500-800lbs of total downforce. How it's distributed depends on where the center of pressure is on the car and that is affected by wing angles, rake, ride height, etc

  5. #5
    Senior Member
    Join Date
    05.08.10
    Location
    Pittsburgh
    Posts
    745
    Liked: 298

    Default

    If you really want to know measure the downforce with your data. 500 sounds closer than 800 for a 1st gen FM.
    Chris Livengood, enjoying underpriced ferrous whizzy bits that I hacked out in my tool shed since 1999.

  6. #6
    Senior Member David Ferguson's Avatar
    Join Date
    09.06.02
    Location
    Paso Robles, CA
    Posts
    1,179
    Liked: 307

    Default

    I meant a total of 500 to 800 lbs. If the weight distribution was 40% front / 60% rear, then that would be 200 to 320 lbs on the front (100 to 160 for each corner), and 300 to 480 on the rear (so 150 to 240 each corner).
    David Ferguson
    Veracity Racing Data
    Shift RPM App for iOS
    805-238-1699

  7. #7
    Contributing Member
    Join Date
    11.10.06
    Location
    Houston, TX
    Posts
    159
    Liked: 76

    Default

    I found the downforce telemetry on this video of a F1000 at HighPlains very enlightening. I kept pausing at various speeds to plot the curve.

    https://www.youtube.com/watch?v=Trcu4Nf7uG0

  8. #8
    Senior Member
    Join Date
    08.22.15
    Location
    Westfalia
    Posts
    1,874
    Liked: 1217

    Default

    Quote Originally Posted by Jake48 View Post
    Jay Jacobellis
    Very nice to see a fellow Colorado Karter here.
    Once we think we’ve mastered something, it’s over
    https://ericwunrow.photoshelter.com/index

  9. #9
    Senior Member
    Join Date
    05.05.06
    Location
    Olalla, WA
    Posts
    782
    Liked: 159

    Default

    I would think the diffuser on that Pheonix would contribute a lot. Just guessing but possibly in the 400 lb. range at speed.

  10. #10
    Member
    Join Date
    02.08.23
    Location
    Highlands Ranch, Colorado
    Posts
    5
    Liked: 1

    Default

    who is E1 pics
    Great video down the back straight I seen numbers approaching 1000lbs

  11. The following members LIKED this post:


  12. #11
    Senior Member
    Join Date
    08.22.15
    Location
    Westfalia
    Posts
    1,874
    Liked: 1217

    Default

    It’s me, that’s who!

    Great catching up, Happy FM!
    Once we think we’ve mastered something, it’s over
    https://ericwunrow.photoshelter.com/index

  13. #12
    Member
    Join Date
    01.10.12
    Location
    SLO, California
    Posts
    18
    Liked: 11

    Default

    Might be able to glean something from this:

    https://www.sciencedirect.com/scienc...95717705004590

  14. #13
    Member
    Join Date
    02.08.23
    Location
    Highlands Ranch, Colorado
    Posts
    5
    Liked: 1

    Default

    That's a mouthful, but an interesting read
    Thanks

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




About Us
Since 2000, ApexSpeed.com has been the go-to place for amateur road racing enthusiasts, bringing together a friendly community of racers, fans, and industry professionals. We're all about creating a space where people can connect, share knowledge, and exchange parts and vehicles, with a focus on specific race cars, classes, series, and events. Our community includes all major purpose-built road racing classes, like the Sports Car Club of America (SCCA) and various pro series across North America and beyond. At ApexSpeed, we're passionate about amateur motorsports and are dedicated to helping our community have fun and grow while creating lasting memories on and off the track.
Social