Gents:
I am in need of 1" x 4" strips of 304 SS shim stock in 0.010", 0.012" and 0.015" thicknesses.
Any help?
Gents:
I am in need of 1" x 4" strips of 304 SS shim stock in 0.010", 0.012" and 0.015" thicknesses.
Any help?
V/r
Iverson
There are plenty of SS shim stock variations available at McMaster… you’ll need to see if you can find dimensions and grade you can work with.
Brandon L. #96 FF
-PM me for RF85/86 bellhousing
Not SS but off Amazon $35
Rick, Paul and I were chatting about this in the shop today, and only partially in jest, I suggested you buy a couple of feeler gauge sets and use the appropriate pieces to wrap around the bearings ....
Ian Macpherson
Savannah, GA
Race prep, support, and engineering.
locktite
Gents:
Buying a new bell crank, but thx for the brain trust.
V/r
Iverson
Loctite "660" 0.010 to 0.020
I've used the Shim Shack for custom cut shims in various thicknesses a few times this year. They have come through for me in every case. They have made me a bunch of NLA gearbox shims from cad drawings. Not cheap, but highly recommended.
https://theshimshack.com/
Ethan Shippert
http://shippertracingservices.com
https://www.norwestff.com
"l'audace, l'audace, toujours l'audace!"
There are currently 2 users browsing this thread. (0 members and 2 guests)