[FONT=Helvetica Neue, Helvetica, Arial, sans-serif][SIZE=2]I am in need of both main and rod bearings for a 1600 race engine rebuild. The motor is for a vintage crossflow powered Lotus 7 and bearings needed are as follows
.020 Mains
.030 NARROW JOURNAL RODS
I know that the mains are readily available but having trouble sourcing the rods. It is a steel Arrow crank and I know that .030 is somewhat iffy but it is a relatively low compression motor with 7200 rpm limit so should be o.k.
Thanks in advance and you can email or call me direct or reply on this forum. Craig Chima (330) 807-0738 or chima97@aol.com[/SIZE][/FONT]