The ECU has been tested and set up by Eric at Quicksilver within the last two years and not used since.
It never hurts to have a spare.
$750. 00
I also have other Zetec stuff. NO QS injection stuff.
Skip Weld
The ECU has been tested and set up by Eric at Quicksilver within the last two years and not used since.
It never hurts to have a spare.
$750. 00
I also have other Zetec stuff. NO QS injection stuff.
Skip Weld
The ECU has been tested and set up by Eric at Quicksilver within the last two years and not used since.
It never hurts to have a spare.
$750. 00 OBO or trade?
I also have other Zetec stuff. NO Quicksilver Injection stuff.
Skip Weld
Weldmotorsports
Last edited by Skip Weld; 05.15.22 at 8:55 PM.
I might take an offer or trade something for the ECU.
Thanks for looking,
Skip
I still have an Pectel T2 ecu and wiring harness for a Zetec powered FC car, Both harnesses and ecu for 1500.
WTB For an 02 FC Van Diemen I need 1 frt and 4 rear pushrods and perhaps the adjusters,
1 LF lower A arm and track rod, 2 RR lower A arms and 1 LR lower A arm.
I have other Van Diemen parts and a couple of core Zetec race engines with oil systems.
Thanks for looking,
Skip Weld
Last edited by Skip Weld; 05.28.22 at 12:12 PM.
Hi Skip. Your PMs are full. Is this Pectel still available?
Still get an error sending you a PM
I'll post here
It appears I fried my Pectel when I shorted the battery and im seeking replacement.
You have a working T2?
I don't think I'll need the harness as mine is in a Caterham but who knows, maybe I fried that too and if you have one I might consider it.
I'm in New York. Thanks!
There are currently 1 users browsing this thread. (0 members and 1 guests)