Does anyone know where I can get threaded bolts with grooves at the end of them for e clips? The spark arrestor on my exhaust uses those bolts.
Does anyone know where I can get threaded bolts with grooves at the end of them for e clips? The spark arrestor on my exhaust uses those bolts.
Last edited by Dave J; 04.17.15 at 10:07 PM. Reason: fix picture
Can you go a bit longer and drill a hole for a cotter pin or safety wire?
Another alternative would be all metal lock nuts.
http://www.aircraftspruce.com/catalo...es/MS21042.php
“Racing makes heroin addiction look like a vague wish for something salty.” -Peter Egan
Anybody with a lathe can turn down the end of a similar fastener and cut a groove, but that 's the hard way.
Look for a company called Stage 8 Fastners.
butch deer
^^^^^^^^^
Thanks for the information - I take a look at them.
A lot of the new go karts use bolts like that. Check with your local kart shops or look up Russell Karting on line.
Summit sells bolts like that for exhaust manifolds.
The above post is for reference only and your results may vary. This post is not intended to reflect the views and opinions of SCCA and should not be considered an analysis or opinion of the rules written in the GCR. thanks, Brian McCarthy, BOD area 9.
I think the exhaust bolts have the grove in the head. He needs the grove at the end of the bolt. Small picture but the grove looked to be at the end of the bolt.
There are currently 1 users browsing this thread. (0 members and 1 guests)