1" deep lug nut

[adamb113]

I need a 1" deep lug nut. I believe my wheels are revo. The OD of the counter sunk part of the nut is 0.675
Thanks,
Adam

[Ian Lenhart]

My guess is that you have a set of revolutions. I'm sure someone on this forum has an extra sets of lug nuts.

[Brian]

You need to also know the thread of the studs and the length of the sleeve portion of the nut, and possibly the diameter of the thick washer. But these are common nuts, buy a new set from any of the normal suppliers. I got a set of 7/16" thread ones from the importers of
Revolution wheels last year/

Brian

[adamb113]

My lug is a 3/8-24 thread 0.675 OD and it has a 1" reach without the washer
Anybody have one?

[Brian]

Those are very common for original Mini wheels, try Mini Mania.

Brian

[adamb113]

Checked out the mini site. They got them but holly cow! $9 a lug. I'll think I'll wait a bit and see if anybody has a box kicking around.
Thanks for the link though. It's plan B

[es285]

I need a 1" deep lug nut. I believe my wheels are revo. The OD of the counter sunk part of the nut is 0.675
Thanks,
Adam

Pm sent

[adamb113]

I still haven't found the lug nut, 3/8-24 thread 0.675 OD and it has a 1" reach without the washer. Most standard ones are .625" OD and not the .675" mine are. Mini Mania doesn't carry them. Pegasus doesn't and Revo doesn't have a U.S. rep anymore. They also didn't return my emails.
Aren't these a standard Lug Nut?????

[Brian]

Call Oliver or David at Britain West 519756 1610. In my experience Oliver can find anything. Even stuff that doesn't exist - he gets some local machinist to make stuff...

BTW you may have to get them too long and cut them off to 1". I had a couple of sets for Minilites that were a lot longer than 1", but they went with the car (cherry 1964 Cooper S race car)

Brian

[AJWALKER]

try http://www.mr-lugnut.com/