I need to order pads for my 84 Reynard SF, and have been told they are two caliper types offered, the LD19 and LD20. The ones on the car are marked AP 901C 3242. Anyone out there know which Lockheed caliper this is?
I need to order pads for my 84 Reynard SF, and have been told they are two caliper types offered, the LD19 and LD20. The ones on the car are marked AP 901C 3242. Anyone out there know which Lockheed caliper this is?
Don't know about the casting numbers. You may have a mix of LD-19's rear and LD-20's front. Or LD-19's all around or, LD-20's all around. Just depends upon what the owners have done to the car over the years.
Pull the pads. Measure across the backing plate 'length wise'.
If they are about 2 3/8 th's inches they are LD-19's.
If they are about 2 5/8 th's inches they are LD-20's.
CREW for Jeff 89 Reynard or Flag & Comm.
Greg, LD-19's on all four corners.
Hawk pads (blues work good for Gimli) from Britain West 1-519-756-1610 Olie or David.
Later
Gord
LD 19's on all 4 corners of my 84 reynard
Jeff Handley
Reynard 84sF
cainesgrandad@yahoo.com ยท www.reynardowners.com
"Luck is when preparation meets opportunity."Roger Penske
It would be very rare if you had the large brakes on the car, as there would be a caliper clearance issue if you have Compomotive wheels. You would be well served with the KFP Magnum, blue (P4211) compound of Carbon-Kevlar brakes.
The Reynard definitely came with LD-19s on all 4 corners, but some folks have put LD-20s on the car--usually on the front. In addition to checking the pad dimensions, you can measure the pistons. LD-19 is 1.625", while LD-20 is 1.75".
Larry Oliver
Internaitonal Racing Products
Last edited by Larry; 05.06.09 at 1:49 PM.
Larry Oliver
There are currently 1 users browsing this thread. (0 members and 1 guests)