See the WIP thread here:
http://isiforums.net/f/showthread.ph...pec-Racer-Ford
See the WIP thread here:
http://isiforums.net/f/showthread.ph...pec-Racer-Ford
2003 VanDiemen FSCCA #29
Follow me on Twitter @KeithCarter74
cool, if they need anything let me know, may be i can help them or put them in touch with people who can
Anthony Carbone Jr.
SCCA SRF Gen3 #16
05 Porsche 997
He will most likely need some dimensional data among other things. Do you have rFactor2? We're also looking for someone who has had a lot of seat time in a Gen2 and Gen3 SRF with rFactor2 to be a test dummy.
2003 VanDiemen FSCCA #29
Follow me on Twitter @KeithCarter74
did this ever happen?
Anthony Carbone Jr.
SCCA SRF Gen3 #16
05 Porsche 997
Still a wip. I'll send you a pm.
2003 VanDiemen FSCCA #29
Follow me on Twitter @KeithCarter74
For anyone willing to help, we're looking to get the following information for the SRF (gen2 or gen3):
- Suspension geometry;
- Spring, shock and bump stop rates (and travel);
- Weights and dimensions for the car, rims (2 of the most common composites should suffice, I'd say aluminium and steel) and wheel hubs;
- Aerodynamic values (downforce and drag) separated by main body, front and rear elements and overall, if possible, at varying speeds (3 should be enough, more would be good);
- All tire data you can get me (dimensions, construction, slip curves, etc).
- Engine HP and torque curves / dyno sheet
2003 VanDiemen FSCCA #29
Follow me on Twitter @KeithCarter74
http://scca-e.com/race-cars/spec-racer-ford/
some of the specs are for Gen2, i would give Enterprises a call for Gen3 motor specs
Anthony Carbone Jr.
SCCA SRF Gen3 #16
05 Porsche 997
again may be for gen 2
http://www.mummbrothers.com/SRF_Stuf...ske_Shocks.htm
try Shawn at motion dynamics, tell him i sent ya, he has my car up there in NH.
Anthony Carbone Jr.
SCCA SRF Gen3 #16
05 Porsche 997
This thread is a little old, but any hope of the SRF coming to rFactor 2?
There are currently 1 users browsing this thread. (0 members and 1 guests)