Lola T-360 project

[gtwiss]

20K OBO Project has been SOLD

Alot to list about this which is believed to be the Klausler car from '74
If you are interested you should give me a call and I can tell you specifics.
This does include the FT200, all 4 corners, most of a cosworth BD, including
a new Gaithercole head, that I have listed in parts.

Best,
Guil
413-449-6844

[Rick Iverson]

20K

Alot to list about this which is believed to be the Klausler car from '74
If you are interested you should give me a call and I can tell you specifics.
This does include the FT200, all 4 corners, most of a cosworth BD, including
a new Gaithercole head, that I have listed in parts.

Best,
Guil
413-449-6844

Guil;

Condition of the monocoque?

[E1pix]

Is it HU2?

[gtwiss]

Is it HU2?

Yes, I do have the chassis tag. The car is missing some of its owner "progression",
but was converted to run in the CAT series by Doug Moe on the West Coast. I do
not however have any log book for it.

Best,
Guil

[E1pix]

Thanks for verifying, Guil.

I’m not a buyer, just an interested protagonist of accurate history.

Best of Luck. Tom was an awesome shoe, as was Carl in several ways.

[nomis]

To add to your sale i have some original motor mounts, A arms and EX system for this car if the buyer is interested

[billtebbutt]

As long as the monocoque is ok (so, some small repairs needed perhaps, but straight and not beat to death) this is the deal of the decade. Good lord, I wish I had the space!!!!!!!

best
bt

[Garey Guzman]

Am I missing the price?

edit - DOH!! Thanks J Leonard!
Getting old isn't for wimps!

[J Leonard]

yes, 20K

[gtwiss]

The basic Motor list is:


Motor:


New Gathercole BDA head with portmatched manifolds(3 bolt version)

Cam box (used)
Cams (used)
buckets rem isf treated (used)

cam cover (used)
Pair Weber 48 DCO/SP (used)
front and rear covers

pulleys (missing one cast cam pulley)
Pan, stamped steel w/2 scavenge outlets
Cosworth Crank (.010 under)
Carillo rods (new) with a 5.434 center to center
Lightweight flywheel with Tilton carbon clutch
FT-200 adaptor
FT-200 trans original no spare gears
Quaife diff for the FT200 (not fitted)

ITG airfilters (new)
Starter(new)
Distributor
Steel jackshaft



So: no waterpump, oilpump

I prefer to buy these new, possibly from Blue Sky
Exhaust with be a custom job


Car:


Needs alot of love, as the rear frames were heavily modified to accept the

Mazda rotary that was used in its U2L Canam form with a 12a Mazda.
The stock and important bits are still there however so for the skilled

fabricator, a rebuilding should be within reach, if not without alot of work.
The suspension arms are good, but in need of replate, save one lower

front which has a repair and should be replaced.


The tub was decent but loose(of course) and had alot of holes where the

sports racer bits were attached to it. I have remade the main skins, and begun
a rebuild on this.


There are 4 original wheels, and a spider and rim for spares. I planned to clean
these up, inspect and use them for rains, purchasing a new set of wheels for slicks
and racing.


I have a cowel and a couple of modified engine covers, and a wing.
I do not have a nose, and while you could use this stuff with alot of work
a new set of bodywork is probably in order, at least that would be the

ideal to get the car looking really great.


The uprights look great and have no weld repairs, and the brakes as well.






All the best,
Guil

[gtwiss]

I will take 17.5K for this.
There is a spare first for the FT200 also.

Best,
Guil

[nomis]

I have the exhaust for this car

[gtwiss]

Lola project has been sold!

Thank you Apexspeed!!