Curious what others are using for the head to exhaust manifold?
I’ve used thick, thin and none with red RTV with varying success.
Curious what others are using for the head to exhaust manifold?
I’ve used thick, thin and none with red RTV with varying success.
Ultra copper RTV and no gasket.
Stonebridge Sports & Classics ltd
15 Great Pasture Rd Danbury, CT. 06810 (203) 744-1120
www.cryosciencetechnologies.com
Cryogenic Processing · REM-ISF Processing · Race Prep & Driver Development
Thick one piece gasket from Ivey..
-John Allen
Tacoma, WA
'82 Royale RP31M
(‘72 Royale RP16 stolen in 2022)
Stonebridge Sports & Classics ltd
15 Great Pasture Rd Danbury, CT. 06810 (203) 744-1120
www.cryosciencetechnologies.com
Cryogenic Processing · REM-ISF Processing · Race Prep & Driver Development
I’ve just used just normal garden variety RTV, but left to go off for a good hour before tightening properly. Worked a treat.
I also use the one piece Ivey gasket. The ones Pegasus sells do not have slotted end holes.
Ed
I'll add to this that the use of RTV without a gasket only works if you haven't used a gasket and bent the flanges already.
[emoji6]
Stonebridge Sports & Classics ltd
15 Great Pasture Rd Danbury, CT. 06810 (203) 744-1120
www.cryosciencetechnologies.com
Cryogenic Processing · REM-ISF Processing · Race Prep & Driver Development
I do use RTV on one side of the spacer I need to use on the XPAG with the Manley manifold since I don't have a Laystall head (yet)
Mike - you may be the only one on this site that understands the above.
Ed
Stonebridge Sports & Classics ltd
15 Great Pasture Rd Danbury, CT. 06810 (203) 744-1120
www.cryosciencetechnologies.com
Cryogenic Processing · REM-ISF Processing · Race Prep & Driver Development
There are currently 1 users browsing this thread. (0 members and 1 guests)