SOLD
This vehicle was part of an estate sale from the collection of the late John Zuccarelli who passed away in 2021. May he RIP.
He was a well-known, well-regarded SCCA participant from the central Florida region. If you were familiar with him and his car collection, you may be familiar with this vehicle.
We believe it to be a late version chassis, 1995-1996, with the latest version updates associated with these great little Formula Fords. We have not been able to locate the chassis tag, nor do we have the logbook. However, there are three wonderful SCCA Race Winner Tags on the roll hoop from 2010, 2012, 2013.
We were informed by a knowledgeable Vector racer/owner that the fact that all four uprights are aluminum versus welded/forged steel, the rear rockers are aluminum, and the chassis roll hoop has the latest configuration allowing the fit of either a Zetec engine or the usual 4-cylinder Kent motor are all indicators of the latest version of this chassis.
The vehicle has three-way adjustable Ohlin shock absorbers with remote canisters.
Transmission is the LD-200 4 speed.
There are two sets of complete bodywork panels included, the long-tail and the short-tail. There is a third used front nose and one spare front battery box, plus three sets of OZ Racing Wheels with tires.
Dashboard is a Digital Stack.
We have no information of who what or when on the Kent 4-cylinder engine. The block is red, and the head is blue. If that leads you to an engine person, great, otherwise, we do not know who built it.
We have done a leak down and got between 3 to 5% leakage. The escaping air was even between the exhaust, the intake manifold, and the blow-by port to the catch tank. So very minimal leakage and evenly spread out between the valves and rings. Oil pressure, 40–55 psi.
There are two Weber Carbs, both 32-36 DGV 5A. One is freshly rebuilt. New plugs, cap, rotor, Pertronix Ignition, fuel filter, engine oil filter, engine oil, trans. oil, misc. oil hoses, water hoses and fuel hoses.
The fuel cell has been flushed and checked and is in good condition.
Belts and fire bottle will need replacement. The new battery is one-eighth of an inch to thick. However, if you bend the lip of the battery tray it would fit. (we leave it up to you).
Need to replace water pump gasket, (included).
An extensive list of spare parts accompanies this ad along with several pictures. We neglected to write down the set of four gears that were in the gearbox when we checked it and reassembled it! Oops! Sorry.
$16,500.00 obo
FYI.......The vehicle is located in Stuart, FL. !!!
formula ford parts 4drilled brake disks 4slotted brake disks 3sets of new brake pads 3sets of used brake pads 1mechanical fuel pump 1fuel pump regulator 2rear axles 2CV joints 1Rear sway bar and mount 3misc. bell housings/adapters assortment of front shock shims 8wheel hub spacer/washers 3starter gear pinions misc. engine gasket sets 6Heim joints misc. 3misc. spherical bearings 2distributor caps 1Dist. rotor 1valve cover 1Stack electronic Dashboard 2new Eibach springs fronts 1- 200 lbs., 1- 250lbs 2used 550 rear springs 1front 500 springs 1front 550 springs 1front 400 springs 2rear upper A-arms 1front upper A-arm 1lower left front A-arm 1lower right front A-arm 1rear shock rocker arm 1front steering rod 1rear toe link rod 1rear shock rod 1front nose box Gears set of 26-24 set of 22-28 set of 28-24 set of 19-25 set of 19-31 set of 18-28 set of 23-28 set of 23-24 set of 24-27 set of 20-32 (2nd gear)