2 Sets Jongbloed FF 3-Piece Wheels

[problemchild]

These 3-piece Jongbloed 330 Series wheels were purchased over a decade ago but have less than 2 hours of use, and are in excellent condition. Originally configured for a Mygale FF with 4-lugs, they were converted to fit on a Van Deimen FF with centerlock wheel nuts, and using LD19 calipers. They currently have 3" of backspace, with a 2 1/4" center hole, 3 3/4" bolt circle for .531 drive pegs. By moving the center section outboard of the rim sections, they could be changed to 4 1/4" back space. The 3 3/4" BC with LD19 calipers was a generic spec used on many cars, so these wheels may fit many cars. The classic polished outer rim is unique and not common on many newer wheels. There are 8 identical wheels, as shown, and one spare new outer rim. $2800. The wheels are in western NY near Niagara Falls. RiceRacePrep -at-gmail.com

Sale pending!

[lowside67]

Are these lighter than the commonly available OZ 1-piece wheels typically used on Van Diemens, such as the ones Primus sells?

-Mark

[alangbaker]

Using an image I found, I was able to create a pretty accurate drawing/model of the OZ wheel for Van Diemens with centrelock wheels.

The OZs have:

Backspace: 81.15mm / 3.19"
Centre hole: 2.25"
Hole depth: 26.93mm / 1.06"
Drive pin hole diameter: 13.7mm / 0.54"

[problemchild]

I will have to weigh one and report back.

One of the attractions is that you can change out the silver parts, so that you can spend time and $150 to rebuilt a bent wheel ..... instead of ordering a $500 replacement wheel.

As mentioned above, they tend not to work with bigger calipers (like LD20s).

The outer silver portions are polished, so people attracted by the classic look, can spend their time on a very finished presentation unlike the anodized black of the OZs.

[JLind]

Ozs will be a pound and a bit lighter per rim

From my notes
Oz’s are 5.5lbs
330’s with cast mag centre are 6.5lbs

James


Sent from my iPhone using Tapatalk

[problemchild]

James weight values sound familiar.

Price reduction to $2600.

[problemchild]

Price reduction to $2400.

[problemchild]

If someone wanted to use the wheels with a 4-lug 100mm BC configuration, the wheels would work as original.
I could even include a set of 12mm wheel nuts.


Sale pending!