crossle 16f body

[wjpierce]

Hi Does anyone know if the original Crossle 16f body which is a single piece including the nose will fit on a 16/20f car? Purely a question of asthetics. If so, does anyone know of bodies or molds for the original 16f that are available? Thanks, Bill Pierce

[kevskisps]

yep it will, main differences between 16 an 20 is the bodywork (top and snozzler) and bottom front wishbones.

With the 16f you will also need the front fibreglass radiator scope that is included in the 20F main body section

Obvious the 16f windshield is different

The yellow 16f #56 is the now the white one #20

For 16F body molds only know of the ones at Crossley. I may be able to locate some used ones but shipping across the pond is the challenge.

[wjpierce]

yep it will, main differences between 16 an 20 is the bodywork (top and snozzler) and bottom front wishbones.

With the 16f you will also need the front fibreglass radiator scope that is included in the 20F main body section

Obvious the 16f windshield is different

The yellow 16f #56 is the now the white one #20

For 16F body molds only know of the ones at Crossley. I may be able to locate some used ones but shipping across the pond is the challenge.

Thanks. Beautiful cars all. I am contemplating the purchase of this Crossle but am drawn to the old body style and really like the wraparound windshield. It is already a beautiful car. If you happen upon something perhaps you could let me know via the forum or a PM.

[goodyscrossle20]

rear lower arms were longer by about 11/4"[less camber change thru swing] and upper arm was also longer. on the frames they moved the lower pick up point from outside to inside the rear frame. ps the yellow body work is now on my 16f # 56