Citation 87v

[dangrace]

Citation 87V
Autowerks engine with 3 weekends
VSR short box
VSR stainless exhaust
Double adjustable front beam
Fox adjustable rear shock
Penske black front shocks
Fuel cell new 2015
Pull up cam lock belts good through 2023
Hard wired transponder unregistered
SRC long course radio set
3 sets mounted slicks
Mounted rains
Located in Naples Florida
$7500

Dan Grace
203-554-0840
dvgrace33@gmail.com

[dangrace]

Still available

[dangrace]

Sale Pending

[Rich_G_SC]

Hi, do you have any info on the clear section of the main cowl? Like how did you make it or who did you get it from? My brewer bodywork is much more enclosed than yours and its all fiberglass. This makes it extremely dark in the interior and I can't even read the tach under some circumstances. Thanks!

[dangrace]

Hi, do you have any info on the clear section of the main cowl? Like how did you make it or who did you get it from? My brewer bodywork is much more enclosed than yours and its all fiberglass. This makes it extremely dark in the interior and I can't even read the tach under some circumstances. Thanks!

Hi Rich
I had the same problem so I cut out the dark plexiglass leaving a 1/2 inch lip. I bought clear polycarbonate sheets from McMaster Carr
P/N 8474K51. Made some patterns from cardboard and cut the sheets to match. The sheets cut easily with a good straight tin snips.
I used Cleco clamps to hold in place, drilled it to accept #4 button head screws. Works fine.

[dangrace]

sold