Hey guys-I need some help here and my searches have not found any answers. I got this barn find car running last season-and made 2 races with the car. This year, I am replacing all of the suspension bolts with AN hardware as well as the bushings. I also replaced the original shocks with steel AVO shocks. What I need now is help on setup. Ride height front/rear, Dunlop starting tire pressures, and camber settings. I am also wondering if there is a torque setting for the front A arm bolts-as they seem to bind the whole suspension if I get them too tight. With the new shocks it also site way high up front now-I need to learn how to adjust these things. My Austin Healey racer is much easier to set up!