Master switch replacement

[Aiken Racing]

I need to replace my master switch on my FF since the red button was never provided to me and the threads are stripped out. The switch body is a rectangular thin style with a push/pull button. I don't care if the new one is a push/pull or twist style but it needs to be slim like the current one I have now.

I don't know who makes the switch I have now but I figured I would post it for you guys to see if it looks familiar. I am going to contact ICP Citation in the next couple days but I figured in the mean time maybe one of you can give me an answer.

Here is a picture of it:

[url="http://www.chrismore.com/graphics/ff_ignition_switch.jpg"]http://www.chrismore.com/graphics/ff_ignition_switch.jpg[/url]

The body of the switch is about 1 3/8" by 1 3/8" by 1/2" depth.

Thanks,
Chris

[Keith Carter]

Chris, I have no idea who makes that. But get the master switch with the key. It is great, I forget that manufacturer but I went through 3 in 1 season. Before finally getting a good one, Mertor or something. They can create gremlings galore.

[John Green]

Hi,
I got a Hella wich make a marine one with seals for only $5 xtra.

Henrik

[Aiken Racing]

So no one has seen a switch anywhere remotely close to the one in the picture above?

That is really what I am asking... I need to get a new one and I don't feel like modifying my frame to get another one to fit. If I have to I will but I don't really want too.

Thanks,
Chris

[DENIS]

I'll take a wild stab at it; try a Marine Supply House and see if it's off a boat.

[Aiken Racing]

Well I lucked out. I checked a few electrical supplies stores and they had nothing. I went to A&A auto and they had the exact switch for $18 so I picked it up. Now I just need to fabricate a red push/pull button as the one that came with it is chrome and isn't very visible.

Thanks,
Chris