Garage Sale - FF Parts

[ascamaro]

Garage Sale - - No longer competing in Formula Ford, cleaned out garage cabinets and found the following. EVERYTHING IS SOLD, Thanks Apex

Weber 32/36 DGV, set up with synchronous linkage and brass float. $350 SOLD
4 Bilstein gas shocks, need rebuilding and spherical bearings. $200 SOLD
Springs 2 1/4 ID x 6", 375lb and 400lb. (2 each) $25 each SOLD
Weber Jets - - fuel, air, idle. See Photos, to many to list. SOLD
Gear sets - LD200, $150 per set. 19/32, 19/27, 21/31, 17/ 34, 16/29 All SOLD
Dog Rings -SOLD, Shift Rod SOLD + Seal for Mark 8/9, $25 each

Shocks are; SOLD
11.875" center to center extended
8.75" compressed
and
12" center to center
9.875" center to center compressed
Shocks can be rebuilt as per Anze Suspension.

Also have a NEW never used 1600 water pump. (Pegasus $157.99) sell for $75 SOLD

Found more stuff.

Rocker arm pedestals - $50 for all 8
Distributor clamp - $20
Crankshaft - $50 (Mains are 2.125" Rods are 1.925") SOLD
Starter (from my Crossle 60F) $75
Push Rods - you pay shipping, they are yours

The carb is sold.

Paypal plus shipping. ( lower 48 )

cantrell17@verizon.net

[ascamaro]

Garage Sale - - No longer competing in Formula Ford, cleaned out garage cabinets and found the following.

Weber 32/36 DGV, set up with synchronous linkage and brass float. $350 SOLD
4 Bilstein gas shocks, need rebuilding and spherical bearings. $200
Springs 2 1/4 ID x 6", 375lb and 400lb. (2 each) $25 each
Weber Jets - - fuel, air, idle. See Photos, to many to list.
Gear sets - LD200, $150 per set. 19/32, 19/27, 21/31, 17/ 34, 16/29
Dog Rings -SOLD, Shift Rod SOLD + Seal for Mark 8/9, $25 each

Shocks are;
11.875" center to center extended
8.75" compressed
and
12" center to center
9.875" center to center compressed
Shocks can be rebuilt as per Anze Suspension.

Also have a NEW never used 1600 water pump. (Pegasus $157.99) sell for $75

Found more stuff.

Rocker arm pedestals - $50 for all 8
Distributor clamp - $20
Crankshaft - $50 (Mains are 2.125" Rods are 1.925")
Starter (from my Crossle 60F) $75
Push Rods - you pay shipping, they are yours

The carb is sold.

Paypal plus shipping. ( lower 48 )

cantrell17@verizon.net

I just keep finding stuff. I have 2 Compomotive wheels. 4 x 3 3/4 PCD, 13" x 5 1/2', 4" back space. They have been glass beaded, painted and then clear coated. One wheel has a minor scratch on the inside. $100 plus shipping for the pair. Wheels are SOLD

[captdigi]

I’ll take the water pump. PM sent.

[Roux]

Al,

I want the 4 Bilsteins. I will PM you.

Thanks

Steve

[ascamaro]

I’ll take the water pump. PM sent.

Did not get your PM

[captdigi]

I just sent another. Please write back regarding payment.
Cheers!
John

[Wingmantim]

Are they the stock pedestals or the machined ones? I am interested in them.

[ascamaro]

Are they the stock pedestals or the machined ones? I am interested in them.

They are all stock.

[Wingmantim]

I will take the wheels, just let me know the shipping so I can get you payment.
Thanks,
Tim

[ascamaro]

I will take the wheels, just let me know the shipping so I can get you payment.
Thanks,
Tim

Sorry, the wheels shipped out this morning.

[cleaver racecar engineering]

Hi, in the photo is that a hewland through bolt on the r/h side near the springs, if so how much and would you send to Australia, Thank You Lloyd.

[ascamaro]

Hi, in the photo is that a hewland through bolt on the r/h side near the springs, if so how much and would you send to Australia, Thank You Lloyd.

Lloyd,

You can get a new Drawbolt from Pegasus for $68.00 US. Part number 1410-A38.

Al

[Wingmantim]

Sorry, the wheels shipped out this morning.

No problem, I am in no rush

[cleaver racecar engineering]

Thanks for reply with the crap exchange rate and the high cost of US postage that would be aprox $180 - 200 ad by the time I got it , so I will go back to my first question . Thank You Lloyd.

[scorp997]

Shift rod came in and is in excellent shape. Thank you for the parts nd quick shipping!

[Earley Motorsports]

Thanks for reply with the crap exchange rate and the high cost of US postage that would be aprox $180 - 200 ad by the time I got it , so I will go back to my first question . Thank You Lloyd.

Hey Lloyd, try making one, there is no strain on it. It is just a locating bolt not a tension bolt as you back it out half a turn once it gets tight. Just a thought.

[cleaver racecar engineering]

HI, Thats what I am doing a bit of fun trying to find out what the thread is when the box is assembled but for all it is M7 a odd one.

[scorp997]

I’m pretty sure it is a 1/4”-20 thread (may be a 1/4”-24 but I’m not sure)
common thread size here in the states. The only metric threads are the studs in the main case, all others are non-metric

HI, Thats what I am doing a bit of fun trying to find out what the thread is when the box is assembled but for all it is M7 a odd one.

[grumpyf14d]

I’ll take all the LD200 gearsets.

Keith

[fshort]

Push Rods - you pay shipping, they are yours


PM sent.

Thank you!

Regards,
James