2000 Swift Toyota Atlantic 008 with lots of spares for sale

[Triallyr]

Offering for sale my beloved 2000 Swift 008 chassis number 053 with lots of spares. This car has no damage history, has seen limited test and tune use (less than 100 miles on Loyning's motor) and is very well equipped.

This car was assembled around tub #053 which had been purchased at the end of the pro series as a spare. This tub was never used and had all of the latest updates. The motor has less than 100 miles and was built from a brand new block, has new std. size JE pistons, new Carillo rods and new TRD crank. The head has new valves, guides and seats. A list of components and spares follows:

ON CAR
5.5” Tilton carbon clutch
New master cylinders
Ohlins TTX 40 shocks
Top mounted generator
Data Acquisition - Aim EVO 4 w/GPS
AIM formula steering wheel/dash
No lift shift
New original style fire bottle
New clutch release bearing
New Bosch 044 fuel pump
New battery

SPARES
Mainshaft for Hewland NST
Jig for setting shift forks
Master cylinders (need rebuild)
Nose cone (new)
Front wing (used)
Spare wishbones:
Front upper (1)
Right front lower (2)
Rear upper (3)
Right rear lower (1)
Left rear lower (3)
Front pushrod (1)
Rear pushrod (1)
Set of rims w/near new wets mounted
Set of slicks (new)
End plates for front wing (4)
Set of 4 crossed drilled rotors (new, cryogenically treated)
Gears sets (at least 9 plus what's in the car)
Transaxle cases (2 used with some internals)
Dogs (8)
Tunnels (L&R)
Bead seat kit complete
Case of Redline transaxle oil
Case of Valvoline Racing motor oil
Radiator (used)
Oil Cooler (used)
Belts for cams, oil pump and generator
Clutch release bearing (Needs rebuild)
Shipping crate for motor
Bracket to keep transaxle and car together while motor is out
Motor trunnions L&R
Set of brake pads
Camber shims (F&R)
Skid plate - jabrock/aluminum/stainless
Spare Muffler
Honing plate for block
Custom alignment bar for stringing car
Custom alignment jigs for setting toe
Set of stands for working on car (3)
Swift Manual

I'm sure there's more in various crates I have around the shop which will go with the car. As I find stuff I will list it.

Must sell, $35k

Steven
619.890.0765

[Triallyr]

And at least 6 pairs of Hyperco springs...

[Triallyr]

Found a 2nd set of good practice rubber. So... One set of good practice rubber on car, one spare set, one new set and one near new rain set mounted.

This is a great car for anyone interested in moving into FA that wants to run a roomy, modern carbon tub chassis with parts still readily available from multiple sources.

Any interest?

[Triallyr]

[Triallyr]

Racing Radios, complete - 3 Kenwood TK3160 with headset, holders, antennas, cables, chargers, aluminum case
2 more gear sets (11, plus what's in the car)
Quicklift jack for rear
Upper rear wishbone (total 4)

ALL INCLUDED WITH CAR

[martbrou]

Nice car. Did you run it in 2018? I looked on atlanticchampionshipseries.com but didn't find any race results. Is the car located in Colorado?

Mart

[Triallyr]

Thank you Mart. The car is actually pretty dirty right now from sitting in storage since 2015 but I'm going through it to get it in race ready form. The tub and miscellaneous parts came from Binder Racing out of Canada.

Steven

[martbrou]

Thank you Mart. The car is actually pretty dirty right now from sitting in storage since 2015 but I'm going through it to get it in race ready form. The tub and miscellaneous parts came from Binder Racing out of Canada.

Steven

Is the car located in Colorado?

[Triallyr]

Yes, the car is in Colorado

[Triallyr]

This car has never been raced. I tracked the car for a few years but the motor in the car is new and had less than 100 miles on it before I moved from California to Colorado and put the car in storage.

Steven

[gbilawsky]

This car has never been raced. I tracked the car for a few years but the motor in the car is new and had less than 100 miles on it before I moved from California to Colorado and put the car in storage.

Steven

Steven,

Would you be willing to sell the complete radio set separately? If so, please PM me and we can work out the details.

Glenn

[Rick Iverson]

Stunning car.

V/r

Iverson

[Triallyr]

Thx Rick, nice of you to comment. I would much prefer to keep the car as it is exhilarating to drive and it was love at first sight for me even though it was purchased completely disassembled. Unfortunately, I need the space and the car isn't being used as I fly sailplanes most often whenever I find myself with any spare time. The price is negotiable although I won't fire sell it as I really don't need the money.

Cheers,

Steven

[mlafontaine]

[QUOTE=Triallyr;575749]Offering for sale my beloved 2000 Swift 008 chassis number 053 with lots of spares. This car has no damage history, has seen limited test and tune use (less than 100 miles on Loyning's motor) and is very well equipped.

This car was assembled around tub #053 which had been purchased at the end of the pro series as a spare. This tub was never used and had all of the latest updates. The motor has less than 100 miles and was built from a brand new block, has new std. size JE pistons, new Carillo rods and new TRD crank. The head has new valves, guides and seats. A list of components and spares follows:

ON CAR
5.5

[Triallyr]

Radios are no longer being offered with the car as they have been sold.

Thx,

Steven

[RrMurph]

Does the car have the updated 014 wheel spindles?
Roger

[Triallyr]

Thank you for your inquiry. The car has the rear spindle update as was required in the pro series.

Steven

[Triallyr]

Now offered as part of the package and as an added incentive to buy this great car, I will have this car professionally painted, at no cost to the buyer, any color(s) of the buyer's choice (up to three colors) prior to the buyer taking delivery.

Steven

[Triallyr]

Like the title says, price lowered to $40k for a quick sale. Car is taking up space in a garage where I build hot rods and I just don't have the room with more cars coming.

Steven
619.890.0765

[Triallyr]

Car really needs to go, now asking $35,000!

Steven

[Rick Iverson]

Curtesy bump.

Steve, for lack of a better term, what is the “stuff” on the front lower wishbone leading edge?

V/r

Iverson

[maiken21]

Still available?

[Triallyr]

Curtesy bump.

Steve, for lack of a better term, what is the “stuff” on the front lower wishbone leading edge?

V/r

Iverson

Carbon fiber aero to cover the wheel cables (you can see them located at the trailing edge of the lower wishbone) that secure wheels to the tub if the wishbone breaks

[Rick Iverson]

Carbon fiber aero to cover the wheel cables (you can see them located at the trailing edge of the lower wishbone) that secure wheels to the tub if the wishbone breaks

Got’cha. GLWTS

[Triallyr]

Still available?

Well... I accepted an offer on the car but have not heard back from the prospective buyer for a few days. In the event he is no longer interested, I would be happy to entertain backup offers.

Steven

[Triallyr]

My Swift 008 has now been sold. Thank you Apexspeed!

Steven