Spring set

[formula none]

These springs are 2.25" inside diameter. The short two are 6" and the long two are nearly 8 inch. I don't know what the rates are but would guess at least 250 lbs. They were kind of rusty so I had them blasted and powder coated and they should be perfectly usable. $100.

[LenFC11]

With out rates they are going to be a hard sell. That's kinda the most important information needed..

[EricP]

With out rates they are going to be a hard sell. That's kinda the most important information needed..

Unless...



I guess rate would still matter... so... what he said...

[BorkRacing]

By wire diameter and spacing it seems all 4 are different rates.
If you can very accurately measure the diameter of the wire (subtracting powder coat thickness) and then accurately measure the length rates can be closely estimated.
But singles are a hard sell.

IMHO, Robby