IIRC, the curb weight was 1,700 before I did the interior.
I have $10k invested in this trailer.
Price $6,000 firm.
2000 Featherlite Model 1625,
18 foot (special manufactured length by Featherlite), measures 19 inside to the vee nose.
7 ft. wide (doesn’t need extended mirrors using a Chevy pickup).
3,500 axles (2)
Ramp rear door, screen door option on side door. Ramp door has stiffeners on it , 67 in between them, a Formula SCCA will just clear them.
Owner installed options:
Custom cabinets in front.
Workbench with 6 drawer Craftsman roller cabinet tool box.
The tool box has an aluminum top, work surface. The toolbox has 2 pins thru the workbench to secure it (pull 2 pins and roll it out beside your car).
Fully wired for 120v. With outside “shore power” plug.
120v. Fluorescent light on ceiling, 12 in. under cabinet light. One double 12v. Outlet at workbench.
Fully wired for 12v. Lights, 2 original ceiling lights, drop down halogen spot lights at side and rear door, one shop droplight reel , wired for 12v. With 25 ft. cord at rear door.
SuperWinch 1,500 winch (easily pulls a FF or FSCCA into the trailer).
12v Battert under the workbench.
E-track on both side walls.
8 floor tiedowns (set up to go over the tires on a Crossle FF)
Recycled plastic indoor/out door carpet on floor (great for camping at the track).
Storage for larger air tank under workbench with quick connects so you can plug a hose in at either door, copper air piping.
Inside completely paneled with white fiberboard (to save weight) , a few slight bows in a couple panels and some scrapes on the paneling from usage)
1 inch R-Tek foam insulation with vapor barrier in side walls and roof.
12v. Electric tongue jack.
Towed with 285 horse Silverado over the Sierra Nevada mountains at 60 mph.
NO weight distribution hitch and NO sway bar required, doesn’t sway on the highway at all.
Low mileage.
More pics, info - Bill road.racer@charter.net