f1000 parts

[follet46]

Would someone be able to help with a set of old tires i can mount i am setting up frame and I am trying to source some used tires all they have to do is hold air



I am chasing wheels and variety of parts for a ground up build

Australian delivery bottom feeder priced accordingly

will look at anything that has some main application

I am chasing a Suzuki engine loom and ecu

could someone help with a 2003 loom and ecu for a car

anything close i guess will fit 2002 maybe

[jaltaman]

Greetings.

I have a set of four uprights, brakes and halfshafts from my Phoeinx FB. The bearings in the uprights only have two race weekends in them. I also have a few new rotors as well as a new set of brake pads.

PM me if you're interested.

Cheers,

John

[Nicholas Belling]

I have 2 sets of magnesium wheels that fit a van dieman hub.

6" and 8"

[brownslane]

I have a set of 4 Stohr Gen 1 uprights, also a Stohr center spar for R-1 and the back half of Stohr chassis for the R-1 spar.

I want $1200 for above; PM if interested.

[follet46]

bump

looking for bits

set of rims

tiers to hold air

dampers shocks

stream line chromemoly

[follet46]

rear brakes calipers rotors

rear wing

front wing


anti roll bar

master cylinders front rear

if u have bits i am interested

[follet46]

i am looking for rims wheels

13" x 7 and 9 inch wide

anything that can turn

[follet46]

fuel tank

rims wheels

wings front rear

[Gearslingr]

Don't know if you still need master cylinders... if so I've got three Wilwoods (my stock Stohr FB units) which were in working order when I replaced them, also a Stock Stohr Front Wing (complete).

I've also got Front / Rear Wilwood calipers too if needed. (stock Stohr equip.)

Doug

coxmotorsports@skybeam.com

[follet46]

I am chasing a Suzuki engine loom and ecu

could someone help with a 2003 loom and ecu for a car

anything close i guess will fit 2002 maybe

[H_Mode]

i am looking for rims wheels

13" x 7 and 9 inch wide

anything that can turn

I have a set of 13" x 7 and 9 inch Kodiak R1K wheels with 4 X 4.25 lug pattern. They also have other holes for pin drive.

PM me if you are interested.

Chris