I'm a frequenter of reader but not poster around here as I was looking a lot here for a similar trailer before I had mine built I figured I'd post here.

Well, it's time to go to an enclosed so I'm going to get rid of my little trailer that has treated me very well for the 18 months that I've had it.

I had this trailer custom made based off of the Brunton design (http://stalkercars.com/trailers/) As they are based in Florida it would have been prohibitively expensive for me to have one shipped.

4" drop axles with a ~14ft bed that tilts at the axle centerline. Inside wheel well dimensions are ~74". This is a fair bit longer than the Brunton design to account for loading my lower than standard car.

This trailer will load very low cars without any extra wood/ramps. I could drive my lotus clone at 3" ride height up the trailer without issue. at 1.75" ride height I have to use some 1" boards for an increased ramp (about 3")

Trailer is very light and can easily be towed behind a car - I towed my ~1200lb car and barely noticed it was there behind my Audi station wagon.

Trailer has a 2" hitch and 7 pin connector with electric trailer brakes and breakaway battery (you won't find this on a trailer this small normally)

Trailer was built in July of 2012 and has been to haul my lotus rep to racing events around the northwest - I've put right at 3000 miles on it since new. I've checked the brakes and repacked the bearings each October/November at the end of the race season.

The wheels & tires are about 6-8 months old. Someone stole the original ones off of the trailer so they were replaced with radial trailer tires and new wheels. The spare tire is a bias ply tire. All three wheels have locks on them.

Pictures! some of them are copies from my build thread





Please let me know if you have any questions! PMs or email to tongboy@yahoo.com

I'm headed down to norcal to pickup my enclosed at the end of this week if anyone is interested in delivery between PDX & Sac.

I'm looking for 2750 OBO. I have an Oregon Title in hand.