Quickjack drawing/print diagram????

[johnnewcomb62]

I am looking for a print or drawing for a quickjack guys. I have some tubing
lying around and a welder handy but would like to have a good print on all the
dimensions to make it quicker. If anyone has one or knows where there is one
on a forum somewhere please fill me in.

Thanks,
John

[p_matt]

John, I don't have a drawing but I can take some pictures and give you measurements on mine

[johnnewcomb62]

Hey that would be great! I have seen them, shoot I have had two or three
just wanted to make sure my overall length and pivot points were somewhere
in the ballpark. So thanks the measurements would be great.

Thanks again,
John

[p_matt]

The outside tubes are 1" square, the inner are 3/4". Minimum height is less than 2", max lift is about 8"

Here are some pics ... more at http://s105.photobucket.com/user/P_M...55545090670795

[johnnewcomb62]

That will work, thanks a ton guy! I'll try and post some pics when I get that
puppy whipped out.

Thanks again, I really appreciate it.

John Newcomb