Sold: FE engine dress kit and mobile stand. I put this kit together when we ran L3 in IMSA Lites. When you have to change an engine at the track, having the engine already dressed saves a ton of time and hassle. It's also a slick way to store the spares. Included in this kit are:
1) Starter (SCCA PN: WM904008, $292.24) with mounting bolts
2) Front motor block (SCCA PN: WM301007, $178.38)
3) Front motor plate with bolts (SCCA PN: WM301008, $107.31)
4) Complete clutch and flywheel (SCCA PN: WM701000A, $857.08) with bolts
5) Ring gear WM1101053, $170.44)
6) Motor top studs (SCCA PN: WM1010804, $5.83 ea.)
7) Ignition coil (SCCA PN: WM992016, $161.18) and wires (SCCA PN: WM301052, $47.51)
8) Throttle cable rod end (SCCA PN: WM591931, $7.78)
9) Rear water manifold (SCCA PN: WM401012, $299.83 with temp sensor (SCCA PN: WM904024, $26.67) and banjo bolt and crush washers
10) Oil filter adapter (SCCA PN: WM301050, $51.92) with -3 oil pressure sensor tap and bolts
11) Front water inlet flange (SCCA PN: WM401002, $155.23) with bolts
12) Alternator with pulley (SCCA PN: WM1194009A, $454.80 )with all mounting brackets (SCCA PN’s: WM904012, $34.45 and WM904013, $46.67) and belt (SCCA PN: WM904022, $15.16)
13) Aeroquip “Startlite” oil lines
14) Custom low profile engine stand with 4 casters (2 locking)
15) Steel exhaust port cover
16) Steel intake port cover
17) Front and rear lift hooks
This is over $3,000 worth of stuff (the prices shown above are SCCA 2009 prices). It's all 100% functional, used parts, but totally race-ready -- no junk. The pictures show a motor with the parts installed.
$1,500 for all. Pick up in Minneapolis, MN or delivery possible to Pro Formula Mazda, IMSA Prototype Lites, or USF2000 races.
You can contact me at bmumm@mummbrothers.com or on my phone (612) 964-5830. If I'm unable to answer your call, please leave a message and I'll get back to you as soon as I can.
Thanks for looking.
Barry