Axles -- CV Style

[sidney]

After trying to set the rear camber on the car, we are stuck with axles that are too short (with spacers already installed).

I'm looking for axles 18-3/4 and 18-1/4 in length for CV Joints. Please PM me or email imacleod at sauer-danfoss dot com

Thanks!

[Mike B]

You can get some blank splined axles from Taylor Race Engineering and just cut the snap ring grooves at your lengths.
Used axles might look okay and work okay but they will fail, usually at a bad time. They never fail on the cool-down lap.

[Brad Ellingson]

TwoDogg, Inc. 815.389.3991

[Joefisherff]

A couple fall into your length, let me know if you want to try them out.

http://www.apexspeed.com/forums/showthread.php?t=32400

Joe