Stohr Setup

[ArielAtom]

Hey guys.

Taking the new car to the track for the first time this weekend. We will be running the car at Hallett, short and tight with a few good sized bumps.

We don't have a good idea on an initial setup. This is an early model Stohr, the McDonalds car. Car has Ohlins and 800 lbs springs in the front and 1000 lbs srings on the rear. Will be running Goodyear 160s.

It would be great if someone could give us a baseline to start with.

Love to get an idea on camber, caster, toe, and ride hieghts.

Currently the car has 1 mm of toe-out per side on the front, 0 mm toe on the right rear and 1 mm of toe-in on the left rear.

Camber is -1.8 on the left front, -2.3 on the right front, -1 on the right rear and -2 on the left rear.

Any help would be appreciated.

Randy (new owner and grinning like a monkey)

[Misterkris]

I would think stohr would give you a complementry basic setup solution.>? RFR has theirs on their sight.Is this uncommen?

oh forgot, have fun must be so exciting!

[cvogeley]

Randy,
Give us a call tomorrow morning and we'll go over a setup with you or email one to you. We can also get you in touch with another Stohr owner who has already run at Hallett.

Craig
Stohr Cars, N.A.
678.648.9677

[RussMcB]

Randy,
Give us a call tomorrow morning and we'll go over a setup with you or email one to you. We can also get you in touch with another Stohr owner who has already run at Hallett.

Craig
Stohr Cars, N.A.
678.648.9677

Craig & Bill @ 10/Tenths helped me out similarly when I got my new (to me) car. They're in that group of people that make this a great sport/hobby.

[ArielAtom]

Thanks to VehDyn and Craig Vogely for first class assistance on my setup question. (and much more) The response was fantastic. Go ApexSpeed!