Fastline chassis F600 project.

[Rick Goodwin]

[SIZE=2]After building many superkart,dragster and motorcycle frames, I have decided to build an F5/600 for road racing. First of all I dont like doing body work so I decided to buy a current body and build a frame to fit inside of it. I chose the Novakar body becuase of the wide foot well that will easly allow three pedals on the floor, and you cant do business with a nicer guy than Don Clar. This is after the first 40 hours of design, cutting, bending and tig welding. The frames is about all done. Now off to cad up all the drive components, susp. parts, and brakes that will include custom 6 piston calipers, investment casted vented metal matrix rotors that will dynamicly float and a host of other parts not seen on F5 cars.










[/SIZE]

[blay]

Hi Rick,

Can tell me the width, height and depth of your 600 engine?

Thanks,
Bill Lay

[Rick Goodwin]

Hi Rick,

Can tell me the width, height and depth of your 600 engine?

Thanks,
Bill Lay

17"wide X 17" deep X 18" tall with the stock pan. add about 3" to the top for the carbs.