Hello
Can anyone please help me with the measurements for the brackets holding the radiator on the Lotus 61?
I have all the attachment points as all the stubs are still in place from the original framework. I also have an original radiator to test with.
I need the following measurements
A: Lenght of tube center of boss to frame tube A=
B: Lenght of tube center of boss to frame tube B=
C: Lenght of tube center of boss to frame tube C=
D: Lenght of tube center of boss to frame tube D=
E: Lenght of tube center of boss to frame tube E=
F: Lenght of tube center of boss to frame tube F=
G: Distance below top of frame tube to centre of boss G=
H: Distance below top of frame tube to centre of boss H=
I: Distance below top of line extension top of frame tubes to top off boss I=
J: Distance centre of boss to frame tube in 90 deg J=
K: Distance centre of boss to frame tube in 90 deg K=
L: Distance centre of boss to frame tube in 90 deg L=
I guess that "I" can be hard to measure if you got the bulkhead in place then measurements from under the frame rails is OK just make a note how you measure. Please see attached picture for which measurement is which.
Thank you in advance
Henrik