WTB: Pinto engine mount head-to-chassis VD 99+

[4mulaGuy]

I am looking for a Van Diemen engine mount that mounts the head to the chassis. It is 2 separate pieces (left and right). Let me know what you have.

- Rob

[D.T. Benner]

Could be some of them have mounts sitting around from engines converted to other makes of chassis?

[Keith Carter]

It's not an actual engine mount you're looking for, correct? You're looking for the chassis brace valve cover from ICP possibly. The head doesn't bolt to the chassis otherwise.

[HazelNut]

if you're looking for an ICP valve cover i've got one, and a bracket to bolt the ICP valve cover to the chassis.

[KRISKAISER84]

I have a left and right side if intrested please call Kris Kaiser K-Hill Motorsports 717-324-2758

[4mulaGuy]

Hi Keith,

I looked at the ICP part, and on my car, there is a mount that bolts to the front of the head and then to the chassis (2 mounts, one on each side. The RH side also has the fitting for the water outlet to the RH radiator and also a -3 tap for a bleed fitting on the top.

- Rob

[HazelNut]

that sounds like the normal front upper engine mount