Results 1 to 25 of 25
  1. #1
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default Parting-out FSCCA

    [size=1]Unfortunately, I need to part out my FSCCA. Please email me direct for specific parts, pricing, and availability. I will sell parts below the latest Enterprises Parts List, with specific discounts depending on condition and age (of the part, not the buyer). Many parts on the car were recently replaced and have very little run time. Other parts may be cosmetically flawed, but perfectly serviceable. The frame is bent in the front, but most of it is still usable as replacement for another car.[/size]

    [size=1]Please don’t email me if you just want prices and are not serious about buying the parts. The prices will be fair. I will not sell the whole car.[/size]
    [size=1][/size]
    [size=1]Many "upgrade" parts are also available, such as alternator and oil cooler.[/size]

    [size=1]Regarding the engine and transmission, I am considering selling these out of FSCCA #11 (ex McCarthy), depending on price. This is the car I ran at the Runoffs and finished second. The engine is very strong, was built by Sandy at Quicksilver, is Enterprises sealed, and has only one 10 minute qualifying session (I did take it easy on the motor), and the 30 minute race – less than 1 hour of total run time. The gearbox has the same amount of time on it since a complete update[/size]

    [size=1]Oliver[/size]
    [size=1]ozitzmann@hotmail.com[/size]

  2. #2
    Senior Member Phil Picard's Avatar
    Join Date
    07.08.03
    Location
    Carolina Motorsports Park
    Posts
    760
    Liked: 106

    Default

    Sorry to hear about your accident at the Runoffs.
    Are you parting out both cars?

  3. #3
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default

    No, I am not parting out FSCCA #11. That car is near new. The reason I mentioned selling the engine and tranny from #11 is because the motor and tranny are fresh and probably easier to sell. They have less than 1 hour of run time. I already have a few people very interested in the tranny complete.

    If I sold the motor or tranny out of #11, I would replace them with those from my car (#008). The motor and tranny in 008 are good too, but have more hours on them.

    Oliver

  4. #4
    Member craig68's Avatar
    Join Date
    01.03.05
    Location
    Joplin, MO
    Posts
    36
    Liked: 0

    Default

    I am looking to put together a spares package this off season.
    e-mail or call me and lets put something together

    Craig
    cckcjoplin@cableone.net
    417-206-3237

  5. #5
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default

    [size=1]Many good parts still available, including:[/size]

    [size=1]Oil cooler[/size]
    [size=1]Alternator[/size]
    [size=1]Steering wheel[/size]
    [size=1]Shift cable (long)[/size]
    [size=1]Exhaust System[/size]
    [size=1]Radiators[/size]
    [size=1]Radiator screens[/size]
    [size=1]Uprights[/size]
    [size=1]Brake Calipers[/size]
    [size=1]Brake Rotors[/size]
    [size=1]Pi System 1 with C-Dash[/size]
    [size=1]Battery (near new)[/size]
    [size=1]ECU[/size]
    [size=1]Engine[/size]
    [size=1]Transmission[/size]
    [size=1]Fiberglass: rear cover, r[/size][size=1]oll hoop cover, s[/size][size=1]ide pods, cockpit bolsters, f[/size][size=1]ront hood (slightly damaged)[/size]

    Many other parts too such as bolts, clips, wires ... whatever you need.

    Thank you to those who have already sent me checks.
    Oliver

  6. #6
    Senior Member Lindsey Wolfer's Avatar
    Join Date
    07.15.01
    Location
    Woodbury , NY USA
    Posts
    534
    Liked: 7

    Default parting out

    do you have any wheels for sale?

  7. #7
    Contributing Member
    Join Date
    10.21.03
    Location
    dallas
    Posts
    73
    Liked: 2

    Default upright

    Oliver- Do you by chance have a rear upright including the bearing, without the hat and rotor, 1/2 shaft including tripods and boots? If so what is the going price of each? what color is the fiberglass and what are you asking for the upper and lower sidepods, undernose tray? radiator?
    thanks,
    Robert
    972-455-1653 - wk or robert.hill@cit.com

  8. #8
    Contributing Member Scott B's Avatar
    Join Date
    12.01.02
    Location
    Chico, CA
    Posts
    230
    Liked: 0

    Default

    Interested in the exhaust system, or at least the header. Please return email asking price and shipping to 95973. If you participate in paypal can move the funds quickly through that service.

    Scott B

    blueheroninn@sbcglobal.net

  9. #9
    Member
    Join Date
    07.08.03
    Location
    Florida
    Posts
    8
    Liked: 0

    Default Contact Info

    Oliver:

    Please provide contact info, either an alternate e-mail address or telephone number. Messages to your hotmail account are bouncing.

    Thanks,

    N.J. Curran

    otpmotorsports@comcast.net

  10. #10
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default

    Sorry you are having trouble with the hotmail account. I just sent you an email direct.

    Phone is 203.938.4833

    Thanks,
    Oliver

  11. #11
    Senior Member
    Join Date
    12.04.02
    Location
    Arlington ,Tx
    Posts
    678
    Liked: 0

    Default F/SCCA parts.

    Did you crash on the start of the FA race at the Runoffs. If so I saw the video of your crash from one the FA cars you passed before the green flag.Wow!What a move.You are lucky the Stewards didn't see the DVD.

  12. #12
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default

    Dear Mr. Sauce,

    ahhh, no. That was not me. But thanks for the presumption!

    If you read the post above, I state that I finished the race in second place for FSC.

    Oliver

  13. #13
    Senior Member
    Join Date
    12.04.02
    Location
    Arlington ,Tx
    Posts
    678
    Liked: 0

    Default F/scca

    Thank you for clarifying that. In my 30 years of racing I can't remember an accident that deserved a serious penalty more than that one.Congratulations on your second place finish.I hope you didn't take offense to me asking the question.

  14. #14
    Classifieds Super License stonebridge20's Avatar
    Join Date
    01.13.06
    Location
    Danbury, CT.
    Posts
    3,704
    Liked: 1907

    Default Hard head award!

    Oliver should get some kind of award for just finishing the Runoffs. After totaling the primary car on Wednesday and a trip to the hospital. He crawled back to the track, pulled out the "parts car" did a full prep and raced it to a second place finish with only one qualifing session and a warm-up to "tune" the car. I watched the whole process and in 20 years of racing, I never saw so much determination! My hat's off to Oliver! Nice job man!

    Mike Agnifilo
    Stonebridge Sports & Classics ltd
    15 Great Pasture Rd Danbury, CT. 06810 (203) 744-1120
    www.cryosciencetechnologies.com
    Cryogenic Processing · REM-ISF Processing · Race Prep & Driver Development

  15. #15
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default

    Many good parts still available for those winter projects:

    [size=1]Driveshaft, Oil cooler, [/size][size=1]Alternator, [/size][size=1]Steering wheel, [/size][size=1]Shift cable (long), [/size][size=1]Exhaust System, [/size][size=1]Radiator, [/size][size=1]Radiator screens, [/size][size=1]Uprights, [/size][size=1]Brake Calipers, [/size][size=1]Brake Rotors, [/size][size=1]Pi System 1 with C-Dash, [/size][size=1]Battery (near new), [/size][size=1]ECU, [/size][size=1]Engine, [/size][size=1]Transmission, [/size][size=1]Fiberglass, and many others.[/size]

    [size=1]Make me an offer[/size]
    [size=1][/size]

    [size=1]Thanks to all who have bought already.[/size]

    [size=1]Oliver[/size]
    Last edited by OZ Racing; 01.09.06 at 5:32 PM.

  16. #16
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default Wheels and Tires

    Four new wheels with new fresh Hoosier rain tires (never run) - $1850

    Four wheels less than 3 months old with 2 heat cycle Hoosier slicks - $1500

    And many other parts (see post above).

    Thanks,
    Oliver
    Last edited by OZ Racing; 01.09.06 at 5:32 PM.

  17. #17
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default

    I have good parts left. Here is a partial list:

    Rear Uprights, Rotors, Radiators, Headers, Rear Wing complete, Seat Belts, Hans Shoulder belts (lower buckle), set of four dynoed and matched shocks, and much else.

    Also Pi system 1 logger and new Pennon Bead seat kit (box never opened).

    Many other parts available too. Please email me direct.

    Thanks,
    oz
    oz[spamdelete]itzmann@hotmail.com

    remove the [spamdelete]

  18. #18
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default Shocks

    Do you want to have an edge over your competitors? To get the best handling for every track, you need to have two sets of shocks available - one set with the old valving, one set with the new. Every track is different. Think of the possibilities - new pair in front, old pair in rear, etc.

    I have one set of dynoed and matched shocks. $900 for four.

  19. #19
    Senior Member
    Join Date
    07.19.04
    Location
    Atlanta
    Posts
    128
    Liked: 0

    Default

    I may be interested in the rear wing lower element if you are willing to sell separate.
    Let me know
    Thanks
    Tyler
    traatz@mindspring.com

  20. #20
    Member
    Join Date
    12.31.04
    Location
    Toronto, Canada
    Posts
    42
    Liked: 0

    Default

    Do you still have the frame left? How bent is the front and what cost.
    please e-mail me at mike@redlinepromotions.com
    thank you

  21. #21
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default

    Since I get many emails, here are some of the popular parts that I do NOT have anymore: control arms, half shafts, Pi System 1, Bead Seat kit, wheels, front uprights, frame rear of fuel cell, fuel cell.

    I DO have one rear upright, one L and one R brake rotor and caliper, and many other parts still available.

    The transmission is available and has not been raced since it had nearly every component replaced, from new input shaft to Taylor "tuned" ring & pinion and differential housing. All new gears, bearings, etc. Make me an offer.

    Thanks to all the buyers,
    Oliver

    oz[spamdelete]itzmann@hotmail.com

  22. #22
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default

    Still good parts for sale

  23. #23
    Contributing Member J Mabee's Avatar
    Join Date
    08.31.03
    Location
    Clinton, MO
    Posts
    609
    Liked: 0

    Default Thanks OZ

    Thanks for the parts and quick shipping Oliver. Back in business this weekend at Mid America Motorplex.
    Jason Mabee
    MiDiv Car FE #01

    "Our Lady of Blessed Acceleration, don't fail us now!" - Elwood Blues

  24. #24
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default

    Quote Originally Posted by J Mabee
    Thanks for the parts and quick shipping Oliver. Back in business this weekend at Mid America Motorplex.
    Thank YOU, Jason.

    To all:

    Good parts still available. Here is a partial list:

    Engine, header, exhaust, ECU, harness, starter, radiator, oil tank, dry sump, sensors, rear upright, seat belts, fiberglass (some w/repairable damage), suspension lever, and all FSCCA nuts, bolts and hardware parts.

    Also alignment bars, Motorola radio with PTT and all car wiring (used once, bought new for Runoffs), spare used dogs and gears.

    Make me an offer.

    oz[spam delete]itzmann@hotmail.com

  25. #25
    Member
    Join Date
    04.18.05
    Location
    Connecticut
    Posts
    47
    Liked: 0

    Default

    In addition, I have rotors, brake calipers, wiring harness, roll hoop, and other parts.

    Make me an offer. Thanks

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




About Us
Since 2000, ApexSpeed.com has been the go-to place for amateur road racing enthusiasts, bringing together a friendly community of racers, fans, and industry professionals. We're all about creating a space where people can connect, share knowledge, and exchange parts and vehicles, with a focus on specific race cars, classes, series, and events. Our community includes all major purpose-built road racing classes, like the Sports Car Club of America (SCCA) and various pro series across North America and beyond. At ApexSpeed, we're passionate about amateur motorsports and are dedicated to helping our community have fun and grow while creating lasting memories on and off the track.
Social