SFI Roll Bar Padding

[Mike Jones]

I hope I don't get in trouble listing this in two places. However, does anyone have a source for this roll bar padding to fit a 1" bar?


Mike

[Dave Gomberg]

Summit Racing. http://store.summitracing.com/partde...5&autoview=sku Although this product comes with an adhesive backing, I find it ncecessary to use tie wraps to hold it in place. (I had the same problem with the Simpson product I used before.) Since it comes in a three foot length, you will likely find that you can use half of it and keep the rest for future use. It also comes in red and blue. Dave

[Joefisherff]

I think Jim carries it as well, here is the contact info:

http://www.continentalmotorsport.com/Aboutus.htm

[EYERACE]

ask for the non-drip stuff.........or is this what you mean by SFI? the dude at Daytona that burned up his S2 and had the liquified hot hoop padding drip on him sure wished he'd had the non-drip stuff

[bryancohnracing]

I've not found the SFI/FIA padding in 1 inch ID. If someone is aware of it out there please let us know! I'm in for 3 feet!

Bryan

[Dave Gomberg]

My apologies for mis-directing you guys - I mis-read the item description I posted above. However, a more carefule search at Summit Racing results in three products that meet the 1 inch requirement. (Other colors may be available on some of these.)

http://store.summitracing.com/partdetail.asp?CP=1&part=KIR-99021&N=0&Ntt=SIM-36008-SFI%20or%20KIR-99021%20or%20KIR-99022&Ntk=KeywordSearch&rsview=sku&Ns=P_Rank|0

http://store.summitracing.com/partdetail.asp?CP=1&part=SIM-36008-SFI&N=0&Ntt=SIM-36008-SFI%20or%20KIR-99021%20or%20KIR-99022&Ntk=KeywordSearch&rsview=sku&Ns=P_Rank|0

http://store.summitracing.com/partdetail.asp?CP=1&part=KIR-99022&N=0&Ntt=SIM-36008-SFI%20or%20KIR-99021%20or%20KIR-99022&Ntk=KeywordSearch&rsview=sku&Ns=P_Rank|0


Dave

[Mike Jones]

Thank you very much. Ask and you shall receive.


Mike