Search:

Thanks Charles......

Thanks, they are on my list of companies to call tomorrow.....

Need to ship a formula car, and one other sports car to Europe, and would be grateful for suggestions and recommendations on capable freight forwarding companies to use???

Wasted 3 weeks with...

And BTW, I plan, over the winter to relocate the main switch or perhaps a secondary switch up under the dash, so I can reach it in the cockpit suring an emergency..... Nice to have the pull cable for...

Hi Charlie,

I have a new switch. The problem is that the pull cable won't move the switch to off when in the on position. It did when I first had the car..... I must have lost a piece? When the...

Finishing up restoration of Ralt RT5-190!! I have the original style pull cable cut off switch in the car. Before I took the car apart, it worked.... but now back in the car it doesn't work. I must...

Looking for a seat back for a 1980 RT5. Any one have one or know of someone who might have a mold?

Thanks, Scott

Seeking advice on Lucas fuel injection timing on my 1600 supervee
I've heard accuracy is not real important so long as you inject sometime during the inlet stroke.
I have the #1 fuel port "just...

Thanks for the reply.....

I talked to Kinbsler today, and basically, the leakage in the front is due to failure of one of the two O rings that seal the sleeve inside the rotor.... I did not know...

I just pressureized my Lucas mechanical fuel injection unit for the first time (RT5 supervee) and it was spewing fuel out of the front "bleed" tube...... I am a fuel injection rookie, and hoping...

Hello All,

I'm doing some historical research and need to locate a copy of the regs. from the 1978 SCCA GCR for Formula B and for Formula Supervee.

Can anyone out there help with a copy or...

Are there any rules of thumb when determining oil line size?

I am plumbing a 1600 supervee, and planning to use -10 AN hose throughout, and I think this is sufficient. I have seen a lot of cars...

Russ,

I'm no RT5 expert. although by the time I'm done with this car I imagine I will be. I was not aware that the RT5's came with an anuular type slave set up - albeit Saab? This car is a 1980,...

I'm using the external set up. I'd like to stay with that. I have seen a picture of a biobbin that came out of an RT5, and it appeared to be a Hewland bobbin, cut in half, and then stretched to the...

Or perhaps a Hewland MK 9 bobbin I can modify? Longer the better.....

Anyone have one under the bench?

I find myself in need of a clutch bobbin for a 1980 Ralt RT5 Formula Supervee. My project appears to be missing one!

I have been told it is just over 4"in overall length.

Thought I'd try to...

I can't imagine that an FT 200 couldn't handle anything a twin cam could throw at it.....?

I run a twin cam with a MK 9 and get more wear than that.....

I assume that you have balanced the...

Thanks for the tip...... I called and talked to E.J. Nice guy, and he answered the questions I had. Thanks again. Great thing this bulletin board!!!!!

Does anyone know anything about a Baci Motorsports Shop located in Chicago that was active in the late 80's??? If it's still in existance? Who was the owner? Contact Info???

I'd like to contact...

After MK 6 and before MK 8......Sorry, couldn't resist!

On the serious side race-cars.com says it is a rare 6 speed version of the MK 4 - made for 1000cc F2 (?) Hewland site says the same...