I designed and built the Wycked7 as a midi type 7. Used a Toyota MR2 for parts, a semi-monocoque chassis and double wishbone...
Type: Posts; User: ExKartracer
I designed and built the Wycked7 as a midi type 7. Used a Toyota MR2 for parts, a semi-monocoque chassis and double wishbone...
I remember using a 5/16" socket head cap screw inserted from the link pin side of the spindle. A 5/16" timesert (or helicoil) was installed in the threaded end of the spindle. The timesert was...
A side note. I had a deformed spacer between the axle and bearing (damaged when the axle was bent in a off track excursion), When the axle nut was tightened, there was run out on the drum face with...
I used one of these in my SkaytR sports racer. They are very high quality. https://secure.chassisshop.com/categories/19804/ I believe Jon Staudacher used something similar in his cars.
Reversing the beam and laying it back as Stan did results in a minimal frontal area re the beam. Unfortunately the caster angle is very large. I wonder how heavy the steering is? The drivers feet...
Jerry,
May I ask what transaxle you ran? Upgrade axles and brakes??
I also would love a copy of the article. johnr at tricksolutions dot com
Thank you and beautiful car, John
Venhillusa.com has a large selection of cable parts.
Sharland designed by Pete Sharland and Michael Sipos. About 5 cars built.
Thanks for the link. Read it and the associated link.
Thanks for the response.
I did find some interesting FSAE info regarding slip angles. 10" tires run at a higher slip angle that 13" tires and their conclusion was anti-ackerman was indicated. Did...
Is there a good baseline for ackerman for the Hoosier F500 tires? Any data on slip angle vs load on these tires?
I just finished a sports racer using the F500 10" wheels, 4 wheel independent...
fillernecksupply.com has a 1" weld on neck and cap. Weld to a piece of tube if all else fails. Good luck
The difference may simply be the valve springs trying to rotate the cams.
A very nice guy that I met when looking at his Speads that he had for sale. Seems very honest. John Rounds Kartracer
To answer #10 - I did a lot of street bug motors and the center main always showed copper with high mileage. I gave it a little more clearance.
#15 - that was the baffle I used but welded 2 baffles...
I ran FV for a number of years in SoCal, built my own engines and did fairly well. I never had a bearing failure that I remember - dropped an exhaust valve because it ran out of "life"!
I had my...
A couple of ideas come to mind. New rotors may not be machined parallel - mike the rotors at various points on the surface. I have seen rotors that warp as soon as they start to get hot and return...
I would be interested in the plans if available. Need a trailer for my new build. Fabrication is no problem.
Thanks, John Rounds
I have built a few FV boxes and found ATF destroyed the ring and pinion. There needs to be some EP (extreme pressure) additive in the oil. I found the Redline diff oils worked well in all the boxes...