Jongbloed Wheels

Gents,
I have a set of Jongbloeds for FC, 6’s & 8’s, normal nicks and dings from use, they were mounted with a set of rains that saw little use, hold pressure well.

Center hole - 2.25
Bolt circle - 3.75
Pin dia. - .5
Backspace - Ft 3.5, Rr 4.5, from rim edge

Also included is a set of 1/4” spacers if needed.

Full disclosure: one front has a .065 wobble, could be straightened by professional wheel shop, otherwise the others are very serviceable.

$800 plus shipping, PM me if interested.

https://www.apexspeed.com/forums/att...d=109344&stc=1https://www.apexspeed.com/forums/att...d=109345&stc=1

Quote:

---

Originally Posted by GregSmith

Full disclosure: one front has a .065 wobble, could be straightened by professional wheel shop, otherwise the others are very serviceable.

---

Is the wobble in the center or the rim? Both halves ?

Always liked the Jongbloeds. Had 3 sets with my old car.

Quote:

---

Originally Posted by BeerBudgetRacing

Is the wobble in the center or the rim? Both halves ?

Always liked the Jongbloeds. Had 3 sets with my old car.

---

Well, good news. It seems that I didn’t have the subject wheel on tight when first checking it out. Centers are true and any deflection is from dings in the wheel halves.

Thanks, Paul, for pointing this out and getting me to do a recheck.

Greg

What's the thickness from the hub-seating surface to the retaining hat seat?

Quote:

---

Originally Posted by DaveW

What's the thickness from the hub-seating surface to the retaining hat seat?

---

They measure 1.125”