Printable View
Does anyone know where I can download the PE3 pro map for the F2000 championship series? I have a car which has been out of commission for a few years with the newer ECU. Tried loading the SCCA map, but I think there are differences with some of the sensors and how they are mapped into the ECU because it's not working. The car originally had the pro map on it back in 2015 when it was last run.
I would contact Eric or Sandy at Quicksilver RacEngines:
https://www.quicksilverraceengines.com/index.htm
I don't know if this is the latest version, or if it is the current "pro" version, but here is a link to "a" PE3 map:
https://www.scca.com/downloads/51949...c2000/download
Also here:Quote:
Originally Posted by DaveW
There is a link to https://www.scca.com/pages/technical...-and-downloads
Club and Pro ECU Map and Profile for Zetec engine classified in the FC class (Requires Pectel Software).
Which for some reason links to the CRB site with additional downloads including a Pro map....
You want the map that has an extension PED, which is on the SCCA web site download page. Also get the PE3 software, it is pretty good and will run on a modern computer.
On a side note, where does one get a cable for the ECU to perform this function? We are in a similar scenario.
J Swank
IIRC, QS has the needed conversion harness.
It should be on the FRP F2000 website under technical specifications
I looked for it there but didn't find it.Quote:
Originally Posted by Bob Wright
It's in this link titled F2000 ECU maps (Zipped folder): https://www.dropbox.com/sh/ohqkwqs5v...PRHU4Q9ma?dl=1
thanks everyone. I will give them a try